Research on Key Parameter Prediction Technology of Small Modular Pressurized Water Reactor Under Ocean Conditions

作者：Yi-Song Cheng, Tong Li, Sichao Tan, Bo Wang, Zhengxi He, Ruifeng Tian · 发表于：Volume 6: Thermal-Hydraulics and Safety Analysis · 年份：2024 · DOI：10.1115/icone31-134788

Small modular pressurized water reactors can currently be installed in floating equipment such as ships and submarines. However, due to factors such as waves and grounding, their operation process is complicated. Long-term prediction of key transient parameters is required. By predicting the reactor over a long period of time Whether the operating status is normal, so as to take measures to correct its operating status and effectively reduce safety accidents, which helps to improve its safety. This article is based on the modeling of a small modular pressurized water reactor designed by Harbin Engineering University. During the modeling process, this article uses Multiple heat transfer tubes of a DC steam generator are used instead of multiple heat transfer tubes to simulate the heat transfer process, which simplifies the model, speeds up calculations, and improves transient accuracy. Later, the relap5 program developed under ocean conditions was used to simulate the rocking under ocean conditions. After obtaining the constant power transient data, this paper made predictions based on the data under ocean conditions. Because under undulating conditions, the key parameters in the reactor are affected by periodic gravity. Field-driven influences exhibit cyclical fluctuations. The greater the fluctuation amplitude, the larger the fluctuation period, the higher the parameter fluctuation range, the greater the power. The sensitivity of key parameters to changes in ocean motion con...