Performance and emission evaluation of CI engine fueled with ethanol diesel emulsion using NiZnFe(2)O(4) nanoparticle additive

作者：Firew D, Nallamothu RB, Alemayehu G, Gopal R · 发表于：Heliyon · 年份：2022 · DOI：10.1016/j.heliyon.2022.e11639 · 被引用次数：27

Diesel engines are widely used due to their higher thermal efficiency and lower Hydrocarbon (HC) emissions. The price fluctuation of petroleum fuel; the none-renewability and different hazardous emissions from petro-diesel, researchers are searching for a suitable renewable energy source for diesel engine. Ethanol is one of the promising alternative fuels that could be used to power diesel engine. Some of the techniques so far tried are ethanol fumigation, dual injection and blending. The former techniques need different engine modification to enable the additional systems to work on the existing engines. Blending is the best technique to substitute the existing diesel fuel as long as we prepare it as per the current diesel fuel minimum requirement. For this specific case micro emulsion of ethanol in diesel fuel with emulsifier is prepared by using magnetic stirrer and bath type ultrasonicator. Nickel Zinc Iron Oxide (NiZnFe2O4) nanoparticle is added in one of the selected emulsion which is having 10% ethanol in three different dose as additive to see the effect on the performance and emission variation of the emulsion compared with diesel fuel. The performance of the prepared sample fuels are tested on a test rig with single cylinder diesel engine. The emission is measured by using exhaust gas analyzer and smoke opacity meter. The specific fuel consumption, brake torque and brake power of E5 (95% diesel and 5% ethanol), E10 (90% diesel and 10% ethanol) and E15 (85% diesel an...