Data from Automatic Weather Station (AWS) / Sun Tracker measurements at Bristol – Queens Building Engineering (BEENGI) from 2024-07-29 to 2025-04-02 [L0]

作者：William Morrison, Sue Grimmond, Dana Looschelders, James Matthews, Matthias Zeeman, Andreas Christen · 发表于：Zenodo (CERN European Organization for Nuclear Research) · 年份：2026 · DOI：10.5281/zenodo.21479482 · 研究领域：Meteorology、Environmental science、Remote sensing

Combined L0 datafile of automatic weather station (AWS) / sun tracker measurements at Bristol – Queens Building Engineering (BEENGI) during the urbisphere / ASSURE Bristol Campaign from 2024-07-29 13:20 to 2025-04-02 10:20 UTC with a temporal resolution of 1 min. Station Bristol – Queens Building Engineering (BEENGI) was operated on a roof of the University of Bristol's Queens Building at 51.456611°N / 2.0613882°W. The L0 dataset contains measurements of direct normal irradiance (DNI), global (solar) hemispherical irradiance (GHI), diffuse (solar) irradiance and longwave hemispherical irradiance (LHI) measured using a sun tracker and continuously ventilated instruments. Further, the dataset contains simple meteorological measurements of barometric pressure, wind velocity, wind direction, air temperature, humidity, precipitation and lightning using a all-in-one weather station next to the sun tracker. The dataset is calibrated using manufacturer calibrations for all instruments and no further quality controlls or gap filling procedures have been applied. Raw data are combined into a single large ASCII file (TOA5 format according to Campbell Scientific Inc.) covering the entire period of observations at BEGROP from 2022-05-10 to 2022-10-17S [L0] based on RAW data. The file BRENGI-MET_1min-202407291320_202504021020_UTC.csv has the format of a comma-separated .csv file with 4 header lines following the Campbell Scientific Inc. TOA5 file definition. Column descriptions: TIMESTAMP:...