Strength Prediction of Cement-Stabilized Steel Slag Using Deep Learning and SHAP Analysis

作者：Z. Gerald Liu, Yuxuan Wang, Jian Sun, Haojie Ji, Xiaoman Shan, Fei Liu · 发表于：Materials · 年份：2026 · DOI：10.3390/ma19040795 · 被引用次数：1 · 研究领域：Concrete and Cement Materials Research、Concrete Properties and Behavior、Innovative concrete reinforcement materials

This study combined experimental analysis with deep learning to investigate the effects of curing age, steel slag content, and gradation composition on the mechanical properties of cement-stabilized steel slag (CSSS). The strength evolution patterns and underlying microscopic mechanisms were systematically elucidated. Experimental results showed that CSSS strength grows nonlinearly with curing age, with optimal mechanical performance achieved at a 60% steel slag content. The microstructural evolution characterized by SEM-EDS and XRD revealed that steel slag incorporation promotes the formation of AFt and densifies the gel network. In later curing stages, natural carbonation of Ca(OH)2 and secondary hydration of reactive steel slag components produce CaCO3 and additional C-S-H gel, which fill pores and significantly enhance long-term strength. A CNN-GRU-Attention model was developed to predict the unconfined compressive strength (UCS) and splitting tensile strength (STS) of CSSS. In a single data split, the model achieved R2 values of 0.9875 for UCS and 0.9911 for STS, with RMSEs of 0.2577 MPa and 0.0234 MPa, and MAEs of 0.2059 MPa and 0.0184 MPa, outperforming all benchmark models. Under rigorous 5 × 5 repeated cross-validation, it maintained the highest average R2 (UCS: 0.9417, STS: 0.9329) and the lowest error metrics, confirming its robustness and generalization capability. SHAP and Pearson correlation analyses identified cement content as the primary strength determinant,...