Wear behavior of eutectic high entropy alloy coatings made by cold spray and thermal spray

作者：S.S. Dash, Cristian Cojocaru, Hyun Suk Choi, Nuo Qu, Ruitian Chen, Jingjie Wei, Maniya Aghasibeig, Éric Irissou, Yu Zou · 发表于：Surface and Coatings Technology · 年份：2026 · DOI：10.1016/j.surfcoat.2026.133290 · 被引用次数：3 · 研究领域：High Entropy Alloys Studies、High-Temperature Coating Behaviors、Intermetallics and Advanced Alloy Properties

High entropy alloys (HEAs) exhibit many promising physical and mechanical properties owing to either a single-phase solid solution or a combination of multiple phases, such as eutectic HEAs (EHEAs). In their bulk form, EHEAs with face-centered cubic (FCC) and body-centered cubic (BCC) phases have depicted superior wear, corrosion, and oxidation resistance along with good thermal stability. Hence, for many applications, the EHEA coatings are highly desirable. Cold spray (CS) process has emerged as an alternative to conventional thermal spray processes, such as high-velocity oxygen fuel (HVOF) spray and air plasma spray (APS) for depositing metallic coatings. Unlike thermal spray techniques, cold spray enables solid-state deposition, preserving the feedstock microstructure and producing dense, oxide-free coatings. In this study, we employ the cold spray and thermal spray techniques (both HVOF and APS) to fabricate dual-phased AlCoCrFeNi 2.1 EHEA coatings. Further, we compare their wear behavior under ambient conditions with a benchmark CS CoNiCrAlY coating. The CS EHEA coating shows a lower coefficient of friction ( m » 0.5) than the HVOF and APS EHEA ( m » 0.6) coatings and similar m as the CS CoNiCrAlY coating. Furthermore, the CS EHEA coatings show a reduced wear rate (~2′10 −4 mm 3 /Nm) than the CS CoNiCrAlY coating (~4′10 −4 mm 3 /Nm), which is attributed to its preserved eutectic microstructure and enhanced wear resistance from in-situ tribo-oxidation. By understanding th...