Wastewater Sludge Dewatering Enhancement by Flocculant Selection and Electrochemical Pretreatment

作者：Binbin Yang, Yingxue Sun, Quanze Liu, Xiaobo Wang, Xiaolei Zhang · 发表于：Separations · 年份：2025 · DOI：10.3390/separations12100264 · 被引用次数：3 · 研究领域：Electrokinetic Soil Remediation Techniques、Coagulation and Flocculation Studies、Wastewater Treatment and Reuse

In wastewater treatment, sludge is generated during both the primary and secondary sedimentation processes. With the growing volume of wastewater, sludge production has increased accordingly. Prior to subsequent treatment or disposal, sludge dewatering is a critical step to reduce volume and improve treatment efficiency. The primary challenge lies in the removal of bonded water within the extracellular polymeric substances (EPSs) and the microorganism cells. In this study, electrochemical pretreatment was employed to improve sludge dewatering performance. The optimal electrochemical treatment was achieved at an electrode spacing of 2 cm, a stirring speed of 500 rpm, and an electrolyte (1 M calcium chloride, CaCl2) dosage of 3 mL for 50 min. Subsequently, flocculation was conducted. Compared with the widely used polyacrylamide (PAM), polydimethyldiallylammonium chloride (PDMDAAC) achieved superior dewatering performance with less than half the dosage required. Under the combined treatment, the final moisture content of the sludge cake was reduced to 53.2%. These findings indicate that the combination of Fe/Ti-based electrochemical pretreatment and flocculation process is a promising and efficient strategy for deep sludge dewatering.