Vacuum Brazing of 6061 Aluminum Using Al-Si-Ge Filler Metals with Different Si Contents

作者：Sen Huang, Jiguo Shan, Jian G. Qin, Yuanxun Shen, Chao Jiang, Peiyao Jing · 发表于：Metals · 年份：2025 · DOI：10.3390/met15080857 · 被引用次数：6 · 研究领域：Aluminum Alloy Microstructure Properties、Advanced Welding Techniques Analysis、Intermetallics and Advanced Alloy Properties

Al-xSi-35Ge (x = 4, 6, 8, 10, 12, wt.%) filler metals were prepared to vacuum braze 6061 aluminum alloy. The wettability of filler metals was studied. A thermodynamics model of the Al-Si-Ge ternary alloy was established to analyze the mechanism and impact of Si in the microstructure of the brazed joint. The findings indicated that Si addition had a slight effect on the melting point of Al-xSi-35Ge filler metals. Great molten temperature region of fillers was responsible for the loss of Ge during the wetting process, making residual filler metal difficult to melt. The microstructure of the joint was characterized by a multilayer structure that was primarily composed of three zones: two transition regions (Zone I) and a filler residual region (Zone II). There was liquidation of filler metal for Al-Si-35Ge filler metals during brazing, resulting in holes and cracks in joints. Increasing the Si content in fillers could alleviate the liquidation of filler metal, owing to diminishing difference of chemical potential of Ge (μGe) in fillers and 6061 substrates, hindering the diffusion of Ge from filler metal to substrates.