Valorization of Alkali–Thermal Activated Red Mud for High-Performance Geopolymer: Performance Evaluation and Environmental Effects

作者：Zhiping Li, Haifeng Dong, Yuwen Wang, Jianbing Men, Junqiang Wang, Xiushao Zhao, Sikai Zou · 发表于：Buildings · 年份：2025 · DOI：10.3390/buildings15142471 · 被引用次数：27 · 研究领域：Concrete and Cement Materials Research、Bauxite Residue and Utilization、Recycling and utilization of industrial and municipal waste in materials production

This study investigates the influence of SiO2/Al2O3 molar ratios (2.25–3.00) and the replacement of red mud (RM) with GGBS (50–63%) on the performance of RM-based geopolymers to address the environmental issues posed by RM, including its high alkalinity and heavy metal content. The results indicated that increasing the SiO2/Al2O3 ratio and incorporating GGBS reduced the fresh properties of the geopolymers. A higher SiO2/Al2O3 ratio promoted the development of compressive strength, likely due to the elevated concentration of soluble silicates. The RM-based geopolymers with higher GGBS content also exhibited greater compressive strength. Moreover, the drying shrinkage and water permeability of RM-based geopolymers increased as the SiO2/Al2O3 ratio and the GGBS content increased. The sustainability assessment revealed that CO2 emissions were influenced by the SiO2/Al2O3 ratio. In comparison to other RM-based geopolymers, the CO2 emissions and costs in this study were reduced by 13.13–44.33% and 3.64–39.68%, respectively. This study discusses the effects of the SiO2/Al2O3 molar ratios on the reaction process and strength formation mechanism of RM-based geopolymers, which provides an effective strategy for the resource utilization of RM.