Ultra‐Soluble 1‐Azaphenothiazine Additive Stabilizes High‐Voltage LiCoO₂ for 500 Wh Kg−1 Lithium Metal Pouch Cells

作者：Hao Guo, Yajun Hou, Xingkai Wang, Zelin Yang, Qianqiu Tian, Qiujiang Dong, Jinyang Li, He Huang, Wanxing Zhang, Hua Qin, Bin Li, Bin Shi, Xiaopeng Han, Wenbin Hu · 发表于：Advanced Materials · 年份：2025 · DOI：10.1002/adma.202503618 · 被引用次数：19 · 研究领域：Advancements in Battery Materials、Advanced Battery Materials and Technologies、Advanced Battery Technologies Research

Abstract High‐voltage LiCoO2 is a promising cathode candidate for achieving high‐energy lithium metal pouch cells. However, further application is still hindered by irreversible structural degradation and severe interfacial side reactions that accelerate capacity decay. Herein, 1‐Azaphenothiazine (1‐APT) is incorporated as a cathode slurry additive (1 g mL−1 in N‐methyl‐2‐pyrrolidone) to promote the optimization of the LiCoO2 interface during the electrode coating process. The ultra‐soluble 1‐APT promotes the formation of inorganic‐rich components within the cathode‐electrolyte interphase (CEI), mitigates the reaction of Co4+ with the electrolyte, and enhances the interfacial stability of LiCoO2, thereby enabling 4.7 V LiCoO2 with an initial capacity of 229.8 mAh g−1 and 73.2% capacity retention after 200 cycles. More importantly, Li||LiCoO2‐1‐APT pouch cells exhibit remarkable electrochemical performance, achieving specific energies of 515.7 , 497.4 , and 484.9 Wh kg−1 at discharge rates of 0.5C, 1C, and 2C, respectively. Notably, the 5 Ah pouch cell exhibited the capability to maintain an energy density of 411.4 Wh kg−1 after 100 cycles at 0.5C. This work presents a practical and effective strategy for optimizing cathode interfaces, thereby enabling the stabilization of high‐voltage cathodes.