New technology of microwave fluidization roasting for enhancing iron recovery from red mud: Mineral phase transformation mechanism

作者：Jinlin Yang, Wentao Zhou, Xuyang Yu, Yanqing Qin, Shaojian Ma, Dingzheng Wang · 发表于：Separation and Purification Technology · 年份：2025 · DOI：10.1016/j.seppur.2025.132932 · 被引用次数：16 · 研究领域：Bauxite Residue and Utilization、Aluminum Alloys Composites Properties、Minerals Flotation and Separation Techniques

Red mud, a by-product of alumina production from bauxite , is a strong alkaline industrial solid waste. The high alkalinity, complex composition, and fine particle size of red mud pose significant challenges in terms of recycling and utilisation. This study proposes a novel approach for efficient recovery of iron in red mud using microwave fluidization roasting technology. The present study systematically investigates the iron mineral recovery process in high-iron content red mud, elucidating the underlying mechanisms of mineral phase transformation from four distinct perspectives: phase transformation, alterations in crystal surface characteristics, lattice transformation, and microstructure evolution . The experimental results demonstrated that, under the optimised conditions of microwave roasting at a temperature of 600 °C for 20 min, the addition of coal powder at a rate of 10 %, the injection of carbon dioxide at a rate of 100 ml/min, and a grinding fineness of −0.0 74 mm accounting for 90 %, and magnetic field strength of 2000 Gs, an iron concentrate with a yield of 74.4 %, iron grade of 59.43 %, and iron recovery rate of 87.61 % was obtained. In addition, analysis via XRD , XPS , TEM, and SEM-EDS detection revealed that hematite in high-iron content red mud during the roasting process was efficiently converted into magnetite, resulting in the formation of a substantial number of cracks and pores on the surface of the roasted product particles. This transformation of th...