Synchronously Restraining the Phase Transition and Structural Defect through a Unique Dopant Strategy for Manganese-Based Layered Cathodes for Sodium-Ion Batteries

作者：Zhongmin Ren, Shuaishuai Chen, Xin Xia, Chun Jiang, Yihan Tang, Jian Liu, Muqin Wang, Zhenlian Chen, Jiefeng Cao, Deyu Wang, Xiaosong Liu · 发表于：ACS Applied Materials & Interfaces · 年份：2025 · DOI：10.1021/acsami.5c01080 · 被引用次数：4 · 研究领域：Advancements in Battery Materials、Advanced Battery Materials and Technologies、Advanced Battery Technologies Research

The P2-type sodium manganese-based layered oxide cathodes suffer from an unsatisfactory phase transition and structural defects due to the instability of the bulk and interfacial structure. In this work, we proposed a manganese-based layered oxide cathode, P2–Na 0.67 Ni 0.25 Mn 0.75 O 2 @Fe 2 O 3 @Ta 2 O 5 (Na2575–Fe–Ta), to increase the bulk and interfacial stability synchronously during cycling. Partially substituting Fe ions into the TMO 2 layer in the bulk lattice structure mitigates the unfavorable phase transition and suppresses the variation of the lattice parameters during charge and discharge, retarding structural degradation. Moreover, the in situ formed NaTaO 3 layer via doping Ta 2 O 5 not only reduces the irreversible release of lattice oxygen but also mitigates electrolyte consumption and parasitic reactions on the electrode–electrolyte interface, which is ascribed to the generation of structural defects after repeated Na + ion insertion/extraction. Consequently, the well-designed sample delivers 214.9 mA h/g under 0.1 C and exhibits 64.6% capacity retention after 200 cycles under 0.5 C, much better than those of the pristine, 19.5 mA h/g and 9.7%. Herein, we demonstrated that the synergistic improvement of bulk and interfacial stability by doping multiple transition metal ions in a one-step method is promising for the application of Na 0.67 Ni 0.25 Mn 0.75 O 2 for sodium-ion batteries.