Roll Torque Vibration Isolation Control on Parallel Active Suspension System via Impedance-Based MPC for Vehicular Terminal

作者：Junfeng Xue, Zhihua Chen, Shoukun Wang, Junzheng Wang, Yongkang Xu · 发表于：IEEE Transactions on Automation Science and Engineering · 年份：2025 · DOI：10.1109/tase.2025.3539596 · 被引用次数：13 · 研究领域：Vehicle Dynamics and Control Systems、Advanced Algorithms and Applications、Simulation and Modeling Applications

To improve the stability of vehicle body dynamics on rugged roads, the majority of researchers have studied vertical force control at the terminal of the vehicle utilizing an active suspension system. However, terminal disturbance roll torque can also have a negative impact on the stability of the vehicle’s state. In this paper, a terminal roll torque control strategy (TRTCS) is proposed to enhance the stability of body attitude by controlling terminal roll torque in wheeled motion. The strategy includes impedance-based model predictive control (IMPC) and terminal posture return controller (TPRC). Firstly, IMPC analyzes the single-leg dynamic model embedded with torque impedance at the terminal. Then, the controller iterates through quadratic optimization to obtain an optimal impedance target torque that can efficiently mitigate terminal disturbance roll torque while stabilizing the terminal roll velocity, acceleration, and force on each electric cylinder. Then, TPRC generates additional smooth return speed for the terminal roll angle to the initial value through the Bezier curve and event-trigger mechanisms to estimate the terminal contact state to the ground. TPRC aims to compensate for low angular return speed due to insufficient measured torque on the suspending terminal during the downhill process. Finally, through simulation and experiment, TRTCS significantly diminishes the deviation of terminal roll torque and body attitude from target value to 25.2% and 35.8% respect...