Design and Implementation of RFID-Enabled Petrol Pump and EV Charging Automation

作者：Hari Prasad Bhupathi, Kambhampati Venkata Govardhan Rao, Gadi Sanjeev, Ch. Naga Sai Kalyan, B. Srikanth Goud · 发表于：E3S Web of Conferences · 年份：2025 · DOI：10.1051/e3sconf/202561603037 · 被引用次数：6 · 研究领域：Fault Detection and Control Systems、Advanced Battery Technologies Research、Industrial Automation and Control Systems

Plan and build an automated gasoline pump system using radio frequency identification technology. Most gas stations use manual pumps. The holder of the vehicle must communicate with the driver. Automating these processes benefits both the vehicle holders and the time saved. We can reduce maintenance costs by eliminating the need for manual power. Here, we suggested an approach like an RFID-based automated gas pump system. EM-18 RFID reader Linked to the Arduino board via UART ports. A relay linked to an Arduino digital pin controls the AC pump/DC EV charging station. Digitised pins on an Arduino board interface with a 4x4 matrix keypad. Swiping an RFID card and entering a password are prerequisites to this project. It will ask for the money if the password is right. The gas station or electric vehicle charging station will turn on and supply fuel based on the amount you enter. When the user enters the wrong password, a buzzer will sound. Subtract the amount from the RFID card according to the amount you enter. If there is not enough, the buzzer will sound. A 16x2 LCD screen will show all this data.