Multifunctional Ultrathin Ti 3 C 2 T x MXene@CuCo 2 O 4 /PE Separator for Ultra‐High‐Energy‐Density and Large‐Capacity Lithium‐Sulfur Pouch Cells

作者：Zimo Huang, Yuhao Liang, Zhenhua Wu, Yang Kong, Maohui Bai, Meng Li, H. Bo, Taiyu Huang, Senchuan Huang, Hao Chen, Shanqing Zhang · 发表于：Advanced Materials · 年份：2024 · DOI：10.1002/adma.202410318 · 被引用次数：54 · 研究领域：Advanced Battery Materials and Technologies、Advancements in Battery Materials、MXene and MAX Phase Materials

Abstract The shuttling of lithium polysulfides (LiPSs), sluggish reaction kinetics, and uncontrolled lithium deposition/stripping remain the main challenges in lithium‐sulfur batteries (LSBs), which are aggravated under practical working conditions, i.e., high sulfur loading and lean electrolyte in large‐capacity pouch cells. This study introduces a Ti 3 C 2 T x MXene@CuCo 2 O 4 (MCC) composite on a polyethylene (PE) separator to construct an ultrathin MXene@CuCo 2 O 4 /PE (MCCP) film. The MCCP functional separator can deliver superior LiPSs adsorption/catalysis capabilities via the MCC composite and regulate the Li + deposition through a conductive Ti 3 C 2 T x MXene framework, enhancing redox kinetics and cycling lifetime. When paired with sulfur/carbon (S/C) cathode and lithium metal anode, the resultant 10 Ah‐level pouch cell with the ultrathin MCCP separator achieves an energy density of 417 Wh kg −1 based on the whole cell and a stable running of 100 cycles under practical operation conditions (cathode loading = 10.0 mg cm −2 , negative/positive areal capacity ratio (N/P ratio) = 2, and electrolyte/sulfur weight ratio (E/S ratio) = 2.6 µL mg −1 ). Furthermore, through a systematic evaluation of the as‐prepared Li‐S pouch cell, the study unveils the operational and failure mechanisms of LSBs under practical conditions. The achievement of ultrahigh energy density in such a large‐capacity lithium‐sulfur pouch cell will accelerate the commercialization of LSBs.