Enhancing plasticity in BCC Mg-Li-Al alloys through controlled precipitation at grain boundaries

作者：Fan Ji, Tongzheng Xin, Yuhong Zhao, Wenkui Yang, Guoning Bai, Song Tang, Enyu Guo, Mengran Zhou, Qingyu Shi, Luqing Cui, Long‐Qing Chen, Binbin He · 发表于：International Journal of Plasticity · 年份：2024 · DOI：10.1016/j.ijplas.2024.104105 · 被引用次数：29 · 研究领域：Magnesium Alloys: Properties and Applications、Aluminum Alloys Composites Properties、Hydrogen Storage and Materials

This study investigates the improvement of plasticity in body-centered cubic magnesium (Mg)-lithium (Li)-aluminum (Al) alloys, crucial for lightweight structural applications. The ternary Mg-Li-Al alloys exhibits high strength but low ductility. Precipitates at grain boundaries in these alloys, linked to reduced plasticity, are examined for their crystal structure and composition. Advanced microscopic techniques reveal the transformation of precipitates and the development of specific structures at grain boundaries. Thermodynamics of element diffusion at grain boundaries are explored through first-principles calculations, and a phase-field simulation models precipitate evolution. Molecular dynamics simulations elucidate nanoscale mechanisms governing the transition from brittle to ductile fracture modes during artificial aging. The D0 3− Mg 3 Al at grain boundaries is a brittle phase, and through a 170 °C aging treatment, it induces the precipitation of lamellar α-Mg phase with D0 3− Mg 3 Al as nucleation sites. The occupancy energy of Al atoms at Li sites in α-Mg is found to be lower than that in D0 3− Mg 3 Al, leading to the dissolution of D0 3− Mg 3 Al. The α-Mg, characterized by a stronger metallic nature, exhibits a better-matched modulus with the matrix and enhanced dislocation mobility. The precipitation of α-Mg plays a pivotal role in significantly improving the ductility of the alloy. This work contributes to the understanding of the complex interplay between alloy c...