26.86-tesla direct-current magnetic field generated with an all-REBCO superconducting magnet

作者：Xintao Zhang, Shuai Hu, Liang Guo, Wenzhe Hong, Zhaoran Wang, Hongjun Ma, Shuqing Zhang, Jinggang Qin, Chao Zhou, Peng Gao, Huan Jin, Liangjun Shao, Timing Qu, Zhiyong Hong, Fang Liu, Huajun Liu, Yuntao Song, Jiangang Li · 发表于：Superconductor Science and Technology · 年份：2024 · DOI：10.1088/1361-6668/ad54f9 · 被引用次数：26 · 研究领域：Physics of Superconductivity and Magnetism、Superconducting Materials and Applications、Particle accelerators and beam dynamics

Abstract This paper reports an all REBCO (REBa 2 Cu 3 Ox, where RE = Y, Gd) superconducting magnet that generated a direct-current magnetic field of 26.86 T at 4.2 K in self-field, which is the highest magnetic field achieved by the high temperature superconducting (HTS) magnet. The magnet consists of a stack of 10 double pancake (DP) coils wound with two different width REBCO conductors, and the no-insulation (NI) winding technology was applied to increase its engineering current density. The inner and outer winding diameters and overall height of the magnet are 30 mm, 103.98 mm, and 102.6 mm, respectively. In order to control the stress risk in HTS magnet, the over-banding made of high elastic modulus stainless steel tapes was employed to the magnet. In addition, no obvious degradation was found in the performance of the magnet after quench at 26.86 T of 295.5 A. These test results demonstrate the great potential of REBCO magnets in high field applications.