Enhancing Kinetics in Sodium Super Ion Conductor Na3MnTi(PO4)3 through Microbe-Assisted and Structural Optimization

作者：Caixia Li, Shuping Pu, Jiapin Liu, Yun Huang, Jiepeng Chen, Xinyan Xiang, Lei Fu, Chao Zou, Xing Li, Mingshan Wang, Yuanhua Lin, Haijun Cao · 发表于：ACS Applied Materials & Interfaces · 年份：2024 · DOI：10.1021/acsami.4c02820 · 被引用次数：19 · 研究领域：Advancements in Battery Materials、Advanced Battery Materials and Technologies、Ferroelectric and Piezoelectric Materials

Sodium (Na) super ion conductor (NASICON) structure Na 3 MnTi(PO 4 ) 3 (NMTP) is considered a promising cathode for sodium-ion batteries due to its reversible three-electron reaction. However, the inferior electronic conductivity and sluggish reaction kinetics limit its practical applications. Herein, we successfully constructed a three-dimensional cross-linked porous architecture NMTP material (AsN@NMTP/C) by a natural microbe of Aspergillus niger (AsN), and the structure of different NMTP cathodes was optimized by adjusting different transition metal Mn/Ti ratios. Both approaches effectively altered the three-dimensional NMTP structure, not only improving electronic conductivity and controlling Na + diffusion pathways but also enhancing the electrochemical kinetics of the material. The resultant AsN@NMTP/C-650, sintered at 650 °C, exhibits better electrochemical performance with higher reversible three-electron reactions corresponding to the voltage platforms of Ti 4+/ 3+, Mn 3+/ 2+, and Mn 4+/ 3+ around 2.1, 3.6, and 4.1 V (vs Na + /Na), respectively. The capacity retention rate is up to 89.3% after 1000 cycles at a 2C rate. Moreover, a series of results confirms that the Na 3.4 Mn 1.2 Ti 0.8 (PO 4 ) 3 cathode has the most excellent electrochemical performance when the Mn/Ti ratio is 1.2/0.8, with a high capacity of 96.59 mAh g –1 and 97.1% capacity retention after 500 cycles.