Solid Electrolyte Bimodal Grain Structures for Improved Cycling Performance

作者：Zhanhui Jia, Hao Shen, Jiawei Kou, Tianyi Zhang, Zhen Wang, Wei Tang, Marca M. Doeff, Ching‐Yu Chiang, Kai Chen · 发表于：Advanced Materials · 年份：2024 · DOI：10.1002/adma.202309019 · 被引用次数：38 · 研究领域：Advanced Battery Materials and Technologies、Advancements in Battery Materials、Advanced Battery Technologies Research

Abstract The application of solid‐state electrolytes in Li batteries is hampered by the occurrence of Li‐dendrite‐caused short circuits. To avoid cell failure, the electrolytes can only be stressed with rather low current densities, severely restricting their performance. As grain size and pore distributions significantly affect dendrite growth in ceramic electrolytes such as Li 7 La 3 Zr 2 O 12 and its variants; here, a “detour and buffer” strategy to bring the superiority of both coarse and fine grains into play, is proposed. To validate the mechanism, a coarse/fine bimodal grain microstructure is obtained by seeding unpulverized large particles in the green body. The rearrangement of coarse grains and fine pores is fine‐tuned by changing the ratio of pulverized and unpulverized powders. The optimized bimodal microstructure, obtained when the two powders are equally mixed, allows, without extra interface decoration, cycling for over 2000 h as the current density is increased from 1.0 mA·cm −2 , and gradually, up to 2.0 mA·cm −2 . The “detour and buffer” effects are confirmed from postmortem analysis. The complex grain boundaries formed by fine grains discourage the direct infiltration of Li. Simultaneously, the coarse grains further increase the tortuosity of the Li path. This study sheds light on the microstructure optimization for the polycrystalline solid‐state electrolytes.