Enhanced Cyclability of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathodes by Integrating a Spinel Interphase in the Grain Boundary

作者：Guobo Yang, Lujun Huang, Jinpeng Song, Guanghui Cong, Xin Zhang, Yating Huang, Jiajun Wang, Yingying Wang, Xiang Gao, Lin Geng · 发表于：ACS Applied Materials & Interfaces · 年份：2022 · DOI：10.1021/acsami.2c18423 · 被引用次数：10 · 研究领域：Advancements in Battery Materials、Advanced Battery Materials and Technologies、Supercapacitor Materials and Fabrication

Nickel-rich layered oxides are promising cathode materials for high-energy-density lithium-ion batteries. Unfortunately, the interfacial instability and intergranular cracks result in fast capacity fading and voltage fading during battery cycling. To address these issues, a coherent spinel interphase in the grain boundary of LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM) was successfully constructed via solution infusion and heat treatment. The results showed that the spinel (LiMn 2 O 4 ) interphase could significantly reduce the formation of intergranular cracks during cycling. Meanwhile, the spinel structure on the primary particles effectively suppressed surface degradation, realizing the reduction of interface charge-transfer resistance and electrochemical polarization. As a result, the spinel-modified NCM cathode materials display superior electrochemical cyclability. The 1 wt % spinel phase-modified NCM delivers a discharge capacity of 154.1 mAh g –1 after 300 cycles (1 C, 3–4.3 V) with an excellent capacity retention of 93%.