Development of a concept and basis for the DEMO diagnostic and control system

作者：W. Biel, M. Ariola, І. Bolshakova, K. J. Brunner, M. Cecconello, I. Ďuran, T. Franke, L. Giacomelli, L. Giannone, F. Janky, A. Krimmer, R. Luís, A. Malaquias, G. Marchiori, O. Marchuk, Didier Mazon, A. Pironti, A. Quercia, N. Rispoli, Samir El Shawish, M. Siccinio, ALEXANDRE AUGUSTO ANDRADE DA SILVA, Carlo Sozzi, Gaetano Tartaglione, T.N. Todd, W. Treutterer, Hartmut Zohm · 发表于：Fusion Engineering and Design · 年份：2022 · DOI：10.1016/j.fusengdes.2022.113122 · 被引用次数：68 · 研究领域：Magnetic confinement fusion research、Fusion materials and technologies、Particle accelerators and beam dynamics

An initial concept for the plasma diagnostic and control (D&C) system has been developed as part of European studies towards the development of a demonstration tokamak fusion reactor (DEMO). The main objective is to develop a feasible, integrated concept design of the DEMO D&C system that can provide reliable plasma control and high performance (electricity output) over extended periods of operation. While the fusion power is maximized when operating near to the operational limits of the tokamak, the reliability of operation typically improves when choosing parameters significantly distant from these limits. In addition to these conflicting requirements, the D&C development has to cope with strong adverse effects acting on all in vessel components on DEMO (harsh neutron environment, particle fluxes, temperatures, electromagnetic forces, etc.). Moreover, space allocation and plasma access are constrained by the needs for first wall integrity and optimization of tritium breeding. Taking into account these boundary conditions, the main DEMO plasma control issues have been formulated, and a list of diagnostic systems and channels needed for plasma control has been developed, which were selected for their robustness and the required coverage of control issues. For a validation and refinement of this concept, simulation tools are being refined and applied for equilibrium, kinetic and mode control studies.