On-orbit calibration and characterization of GOES-17 ABI IR bands under dynamic thermal condition

作者：Zhipeng Wang, Xiangqian Wu, Fangfang Yu, J. P. Fulbright, Elizabeth Kline, Hyelim Yoo, Timothy J. Schmit, Mathew M. Gunshor, Monica M. Coakley, Mason Black, Daniel T. Lindsey, Haifeng Qian, Xi Shao, R. Iacovazzi · 发表于：Journal of Applied Remote Sensing · 年份：2020 · DOI：10.1117/1.jrs.14.034527 · 被引用次数：20 · 研究领域：Calibration and Measurement Techniques、Atmospheric Ozone and Climate、Infrared Target Detection Methodologies

The Advanced Baseline Imager (ABI) is a passive imaging radiometer on-board National Oceanic and Atmospheric Administration’s (NOAA) Geostationary Operational Environmental Satellites-R (GOES-R) series. Its bands 7 to 16 are categorized as infrared (IR) bands, sampling within a spectral range of 3.9 to 13.3 μm in mid-wave infrared (MWIR) and long-wave infrared (LWIR) regions. ABI provides variable area imagery and radiometric information of Earth’s surface, atmosphere, and cloud cover. All of the IR bands are calibrated on-orbit in reference to an internal blackbody. While the ABI aboard the GOES-16 satellite has been working properly, an anomaly with GOES-17 ABI’s cooling system, specifically its loop heat pipe (LHP) subsystem, prevents heat from being efficiently transferred from the ABI electronics to the radiator to be dissipated into space. As a consequence, the heat accumulates inside the instrument, so the temperatures of its key components for IR calibration, including the focal plane modules (FPMs), scan mirrors, and blackbody, cannot be maintained at their designed operational levels. As an example, the temperatures of MWIR and LWIR FPMs, where IR detectors are located, are currently operated at a baseline temperature of ∼20 K warmer than the design and vary by as many as 27 K diurnally. This causes severe degradation to the data quality of ABI IR Level 1b radiance and subsequent Level 2+ products during the hot period of the day. Significant progress has been made ...