Influence of center gas supply device on gas–solid flow in COREX shaft furnace through DEM–CFD model

作者：Heng Zhou, Shuyu Wang, Binbin Du, Mingyin Kou, Zhiyong Tang, Jiahui Yang, Shengli Wu, E Dianyu · 发表于：International Journal of Chemical Reactor Engineering · 年份：2020 · DOI：10.1515/ijcre-2020-0012 · 被引用次数：13 · 研究领域：Iron and Steelmaking Processes、Metallurgical Processes and Thermodynamics、Mineral Processing and Grinding

Abstract In order to develop the central gas flow in COREX shaft furnace, a new installment of center gas supply device (CGD) is designed. In this work, a coupled DEM–CFD model was employed to study the influence of CGD on gas–solid flow in COREX shaft furnace. The particle descending velocity, particle segregation behaviour, void distribution and gas distribution were investigated. The results show that the CGD affects the particles descending velocity remarkably as the burden falling down to the slot. Particle segregation can be observed under the inverse ‘V’ burden profile, and the influence of CGD on the particle segregation is unobvious on the whole, which causes the result that the voidage is slightly changed. Although the effect of CGD on solid flow is not significant, the gas flow in shaft furnace has an obvious change. Compared with the condition without CGD, in the case with CGD, the gas velocity is improved significantly, especially in the middle zone of the furnace, which further promotes the center gas distribution. Meanwhile, the pressure drop in the furnace with the installation of CGD is increased partly.