Variable amplitude fatigue test of M30 high-strength bolt in bolt-sphere joint grid structures

作者：Bin Qiu, Honggang Lei, Xu Yang, Zichun Zhou, Guoqing Wang · 发表于：Steel and Composite Structures · 年份：2019 · DOI：10.12989/scs.2019.33.3.433 · 被引用次数：13 · 研究领域：Fatigue and fracture mechanics、High-Velocity Impact and Material Behavior、Engineering Structural Analysis Methods

Fatigue failure of a grid structure using bolt-sphere joints is liable to occur in a high-strength bolt due to the alternating and reciprocal actions of a suspension crane. In this study, variable amplitude fatigue tests were carried out on 20 40 Cr steel alloy M30 high-strength bolts using an MTS fatigue testing machine, and four cyclic stress amplitude loading patterns, Low-High, High- Low, Low-High-Low, and High-Low-High, were tested. The scanning electron microscope images of bolt fatigue failure due to variable amplitude stress were obtained, and the fractographic analysis of fatigue fractures was performed to investigate the fatigue failure mechanisms. Based on the available data from the constant amplitude fatigue tests, the variable amplitude fatigue life of an M30 high-strength bolt in a bolt-sphere joint was estimated using both Miner's rule and the Corten-Dolan model. Since both cumulative damage models gave similar predictions, Miner's rule is suggested for estimating the variable-amplitude fatigue life of M30 high-strength bolts in a grid structure with bolt-sphere joints; the S-N fatigue curve of the M30 high-strength bolts under variable amplitude loading was derived using equivalent stress amplitude as a design parameter.