Hardening and precipitation of a commercial 6061 Al alloy during natural and artificial ageing

作者：Y Chen, Baokun Lu, Houjie Zhang · 发表于：IOP Conference Series Materials Science and Engineering · 年份：2020 · DOI：10.1088/1757-899x/770/1/012065 · 被引用次数：4 · 研究领域：Aluminum Alloy Microstructure Properties、Microstructure and mechanical properties、Aluminum Alloys Composites Properties

Abstract In this study, the precipitation and hardening of a commercial 6061 Al alloy during the combined natural and artificial ageing are analyzed, in order to maximize the alloy hardness by adjusting ageing time and temperature. The samples were solution-treated at 540°C for 2 hours, followed by water quenching. An artificial ageing was performed at 180, 200, and 220°C during a period from 2 min to 12 h. Natural ageing at room temperature during 12 h was performed simultaneously with the artificial one at different elevated temperatures. The Vickers hardness values of solution-treated and aged samples were measured. Precipitates were characterized via the X-ray diffraction and scanning transmission electron microscopy equipped with the energy dispersive X-ray spectroscopy. The highest hardness values were exhibited by samples that were naturally aged for 12 hours and artificially aged for 24 hours at 200 and 220°C. The hardness improvement was found to be controlled by the formation of β” phases before the peak ageing.