Scholay

学术搜索 · AI 审稿 · LaTeX 协作

Real RGB printing AMOLED with high pixel per inch value

作者:Sitao Huo, Li‐Qin Shao, Ting Dong, Jisheng Liang, Ze‐Tong Bi, Mu He, Zhe Li, Zhuo Gao, Jingyao Song · 发表于:Journal of the Society for Information Display · 年份:2020 · DOI:10.1002/jsid.867 · 被引用次数:16 · 研究领域:Thin-Film Transistor Technologies、Organic Light-Emitting Diodes Research、Nanomaterials and Printing Technologies

Abstract A 403‐ppi (pixel per inch) real RGB active‐matrix organic light‐emitting diode (AMOLED) was fabricated without using fine metal mask (FMM). Organic light‐emitting materials were printed on array panel, with a novel process that has the advantages of low cost and high pixel density. The uniformity of the organic light‐emitting diodes (OLEDs) was improved with carefully tuning printing parameters, and good panel performance was achieved. The key to such a process was the design of the hexagonal patterning of the pixels. The image quality of the panel with this hexagonal pixel arrangement was evaluated with a bmp format Pixel Layout Simulation picture.