High‐Capacity Spherical LiNi 0.82 Co 0.15 Al 0.03 O 2 Cathode for Lithium‐Ion Batteries

作者：Guoliang Bai, C. A. Wang, Jiaojiao Luo, Hongyu Xia, Qibo Luo, Junwei Wang, Cheng Di · 发表于：ChemistrySelect · 年份：2019 · DOI：10.1002/slct.201901427 · 被引用次数：9 · 研究领域：Advancements in Battery Materials、Advanced Battery Materials and Technologies、Supercapacitor Materials and Fabrication

Abstract A novel high‐capacity‐spherical LiNi 0.82 Co 0.15 Al 0.03 O 2 (NCA) cathode material is prepared by two‐step method. Firstly, the co‐precipitation method is used to prepare Ni 0.82 Co 0.15 Al 0.03 (OH) 2 precursors. Then, the sol‐gel method is applied to mix the Ni 0.82 Co 0.15 Al 0.03 (OH) 2 precursors and Li 2 CO 3 so that Li can get in touch with Ni 0.82 Co 0.15 Al 0.03 (OH) 2 precursors evenly. Compared to the conventional Ni‐rich cathode materials, the NCA cathode material exhibits improved reversible capacity, capacity retention, rate performance and better thermal stability. But beyond that, improving the thermal stability of the NCA cathode material at 4.5 V is also very important. Even more remarkably, the NCA cathode material exhibits an excellent rate capacity of about 175 mAh g −1 at 5 C with a cut‐off potential range between 2.8 and 4.5 V, corresponding to around 670 Wh kg −1 at 25 °C. It also provides significantly improved thermal stability at the high temperature of 60 °C, with a discharge capacity of 125.1 mAh g −1 after 200 cycles with capacity retention of 56.3%. Therefore, the NCA cathode material is one of the best classes of cathode materials that could satisfy the demands of future electric vehicles.