Unprecedented Piezoresistance Coefficient in Strained Silicon Carbide

作者：Junfeng Cui, Zhenyu Zhang, Dongdong Liu, Danli Zhang, Weibing Hu, Li Zou, Yao Lu, Chi Zhang, Huanhuan Lu, Chun Y. Tang, Nan Jiang, Ivan Paul Parkin, Dongming Guo · 发表于：Nano Letters · 年份：2019 · DOI：10.1021/acs.nanolett.9b02821 · 被引用次数：77 · 研究领域：Nanowire Synthesis and Applications、Semiconductor materials and devices、Silicon Carbide Semiconductor Technologies

Reports reveal that the piezoresistance coefficients of silicon carbide (SiC) nanowires (NWs) are 2 to 4 times smaller than those of their corresponding bulk counterparts. It is a challenge to eliminate contamination in adhering NWs onto substrates. In this study, a new setup was developed, in which NWs were manipulated and fixed by a goat hair and conductive silver epoxy in air, respectively, in the absence of any depositions. The goat hair was not consumed during manipulation of the NWs. The process took advantage of the stiffness and tapered tip of the goat hair, which is unlike the loss issue of beam sources in depositions. With the new fixing method, in situ transmission electron microscopy (TEM) electromechanical coupling measurements were performed on pristine SiC NWs. The piezoresistance coefficient and carrier mobility of SiC NW are −94.78 × 10 –11 Pa –1 and 30.05 cm 2 V –1 s –1, respectively, which are 82 and 527 times respectively greater than those of SiC NWs reported previously. We, for the first time, report that the piezoresistance coefficient of SiC NW is 17 times those of its bulk counterparts. These findings provide new insights to develop high performance SiC devices and to help avoid catastrophic failure when working in harsh environments.