Highly Efficient Semitransparent Solar Cells with Selective Absorption and Tandem Architecture

作者：Lijian Zuo, Xueliang Shi, Weifei Fu, Alex K.‐Y. Jen · 发表于：Advanced Materials · 年份：2019 · DOI：10.1002/adma.201901683 · 被引用次数：144 · 研究领域：Perovskite Materials and Applications、Organic Electronics and Photovoltaics、Organic Light-Emitting Diodes Research

Abstract Semitransparent (ST) photovoltaics (PVs) with selective absorption in the UV or/and near‐infrared (NIR) range(s) and reduced energy losses, are critical for high‐efficiency solar‐window applications. Here, a high‐performance tandem ST‐PV with selected absorption in the desirable regions of the solar spectrum is demonstrated. An ultralarge‐bandgap perovskite film (FAPbBr 2.43 Cl 0.57 , E g ≈ 2.36 eV) is first developed to fulfil efficient selective absorption in the UV region. After optimization, the corresponding ST single junction (SJ) PV exhibits an averaged transmittance (AVT) of ≈68% and an efficiency of ≈7.5%. By sequentially reducing the visible absorbing component in a low‐bandgap organic bulk‐heterojunction layer, an ST‐PV with selective absorption in the NIR is achieved with a power conversion efficiency (PCE) of 5.9% and a high AVT of 62%. The energy loss associated with the SJ ST‐PVs is further reduced with a tandem architecture, which affords a high PCE of 10.7%, an AVT of 52.91%, and a light utilization efficiency up to 5.66%. These results represent the best balance of AVT and PCE among all ST‐PVs reported so far, and this design should pave the road for solar windows of high performance.