Generation of Volatile Cadmium and Zinc Species Based on Solution Anode Glow Discharge Induced Plasma Electrochemical Processes

作者：Xing Liu, Zhifu Liu, Zhenli Zhu, Dong He, Siqi Yao, Hongtao Zheng, Shenghong Hu · 发表于：Analytical Chemistry · 年份：2017 · DOI：10.1021/acs.analchem.7b00126 · 被引用次数：77 · 研究领域：Plasma Applications and Diagnostics、Analytical chemistry methods development、Gas Sensing Nanomaterials and Sensors

In this study, a novel high efficiency vapor generation strategy was proposed on the basis of solution anode glow discharge for the determination of Cd and Zn by atomic fluorescence spectrometry. In this approach, a glow discharge microplasma was acted as a gaseous cathode to initiate the plasma electrochemical vapor generation of Cd and Zn. Cadmium/zinc ions could be converted into molecular species efficiently at the plasma–liquid interface from a supporting electrolyte (HCl, pH = 3.2). It was found that the overall efficiency of the plasma electrochemical vapor generation (PEVG) system was much higher than the conventional electrochemical hydride generation (EcHG) and HCl-KBH 4 system. With no requirement for other reducing reagents, this new approach enabled us to detect Cd and Zn with detection limits as low as 0.003 μg L –1 for Cd and 0.3 μg L –1 for Zn. Good repeatability (relative standard deviation (RSD), n = 5) was 2.4% for Cd (0.1 μg L –1 ) and 1.7% for Zn (10 μg L –1 ) standard. The accuracy of the proposed method was successfully validated through analysis of cadmium in reference material of stream sediment (GBW07311), soil (GBW07401), rice (GBW10045), and zinc in a simulated water sample (GSB 07-1184-2000). Replacing a metal electrode with a plasma offers the advantage of eliminating potential interactions between the species in liquid and the electrode, which solves the issues associated with electrode encountered in conventional EcHG. The ability to initiate e...