Six-Plate Capacitive Coupler to Reduce Electric Field Emission in Large Air-Gap Capacitive Power Transfer

作者：Hua Zhang, Fei Lu, Heath F. Hofmann, Weiguo Liu, Chris Chunting Mi · 发表于：IEEE Transactions on Power Electronics · 年份：2017 · DOI：10.1109/tpel.2017.2662583 · 被引用次数：184 · 研究领域：Wireless Power Transfer Systems、Energy Harvesting in Wireless Networks、Advanced Battery Technologies Research

This paper proposes a six-plate capacitive coupler for large air-gap capacitive power transfer to reduce electric field emissions to the surrounding environment. Compared to the conventional four-plate horizontal structure, the six-plate coupler contains two additional plates above and below the inner four-plate coupler to provide a shielding effect. Since there is a capacitive coupling between every two plates, the six-plate coupler results in a circuit model consisting of 15 coupling capacitors. This complex model is first simplified to an equivalent three-port circuit model, and then to a two-port circuit model which is used in circuit analysis and parameter design. This six-plate coupler can eliminate the external parallel capacitor in the previous LCLC topology, which results in the LCL compensation and reduces the system cost. Due to the symmetry of the coupler structure, the voltage between shielding plates is limited, which reduces electric field emissions. Finite element analysis by Maxwell is used to simulate the coupling capacitors and electric field distribution. Compared to the four-plate horizontal and vertical structures, the six-plate coupler can significantly reduce electric field emissions and expand the safety area from 0.9 to 0.1 m away from the coupler in the well-aligned case. A 1.97 kW prototype is implemented to validate the six-plate coupler, which achieves a power density of 1.95 kW/m2and a dc-dc efficiency of 91.6% at an air-gap of 150 mm. Experimen...