Effect of electromagnetic parameters on the motion and entrapment of inclusions in FC-Mold continuous casting strands

作者：Shengdong Wang, Lifeng Zhang, Qiangqiang Wang, Wen Yang, Yi Wang, Lei Ren, Limei Cheng · 发表于：Metallurgical Research & Technology · 年份：2016 · DOI：10.1051/metal/2016003 · 被引用次数：22 · 研究领域：Metallurgical Processes and Thermodynamics、Solidification and crystal growth phenomena、Phase Change Materials Research

In the current study, the three-dimensional fluid flow, heat transfer and solidification in FC-Mold continuous casting strands were simulated, and the influences of upper and lower magnetic fields of FC-Mold on the distribution of inclusions beneath the surface of the slab were discussed, considering the washing effect of flow on the solidifying front. The results indicate that the influence of FC-Mold on fluid flow in steel continuous casting mold is determined by the choice of SEN and the intensity of upper and lower magnetic fields. Larger upper magnetic field intensity was not recommended due to high flow speed at meniscus. The maximum flow speed at meniscus was 0.48 m/s when the upper magnetic intensity was 0.68 T in the current simulation. After applying FC-Mold, more superheated molten steel was brought to the upper recirculation zone contributing to temperature increase at meniscus. With regard to the entrapment of inclusions, a criterion was established and validated, considering the effect of flow on the motion of inclusions. Increasing the intensity of upper and lower magnetic fields could make the region 5 mm below the surface become cleaner, and eliminate the aggregation of inclusions.