Fresh Tar (from a Biomass Gasifier) Elimination over a Commercial Steam-Reforming Catalyst. Kinetics and Effect of Different Variables of Operation

作者：Ian Narváez, José Corella, Alberto Orío · 发表于：Industrial & Engineering Chemistry Research · 年份：1997 · DOI：10.1021/ie960235c · 被引用次数：147 · 研究领域：Thermochemical Biomass Conversion Processes、Catalysts for Methane Reforming、Catalysis and Hydrodesulfurization Studies

The upgrading of the raw gas from a biomass gasifier is studied with the commercial steam-reforming BASF G1-25 S nickel-based catalyst. It is located downstream of the gasifier, a bubbling fluidized bed type in which air is used as gasifying agent. To increase the catalyst lifetime, a guard bed of a calcined dolomite at 800−850 °C is used. It decreases the throughput of tar entering the catalytic bed to amounts below 2 g tar/m 3 (NC). This work is focused only on the catalytic bed which easily decreases the tar content in the gas to only 1−2 mg/m 3 (NC). Variables studied include the particle diameter of the catalyst, time-on-stream, temperature of the catalytic bed, and gas and tar compositions. Both tar and gas compositions in the catalytic (Ni) reactor depend on the equivalence and H/C ratios existing in the gasifier and on the operating conditions of the guard bed of dolomite. A simple kinetic model is used to describe the overall tar elimination network. Its overall kinetic constant is used as index of the catalyst activity for tar elimination. Values of this overall kinetic constant are given for very different operating conditions.