Oil and Grease Measurement in Highway Runoff—Sampling Time and Event Mean Concentrations

作者：Sabbir Mostafa Khan, Sim‐Lin Lau, Masoud Kayhanian, Michael K. Stenstrom · 发表于：Journal of Environmental Engineering · 年份：2006 · DOI：10.1061/(asce)0733-9372(2006)132:3(415) · 被引用次数：65 · 研究领域：Urban Stormwater Management Solutions、Infrastructure Maintenance and Monitoring、Flood Risk Assessment and Management

An event mean concentration (EMC), usually collected with an automatic, flow-weighted composite sampler, is often used to characterize stormwater pollutants. Automatic samplers are not recommended for collecting oil and grease (O&G) samples due to possible biases associated with interactions with tubing and pumps. To measure the EMC without sampler interferences, a series of grab samples (often over ten samples) must be collected along with the flow measurement to compute the EMC. This paper examines 22 O&G pollutographs from small, impervious highway sites, to determine when a single O&G grab sample most closely approximates a flow-weighted composite sample. Samples collected within the first hour of a storm event overestimated the O&G EMC by 20mg∕L or more, while samples collected toward the end of the event underestimated the EMC. The best time to collect a single grab sample ranged from 1 to 6 h after the beginning of runoff, and was related to site or storm-specific factors. Results obtained from this study also showed that strong correlations (R2=0.9) exist between O&G and other organic constituents, such as chemical oxygen demand (COD) and dissolved organic carbon (DOC). Correlations also exist between O&G EMC, antecedent dry days, and total rainfall. Depending upon site and regulatory specific factors, using COD or DOC EMCs in lieu O&G samples may be a better strategy.