Quench and quench protection for the SSC collider correctors

作者：Aofeng He · 年份：2002 · DOI：10.1109/pac.1993.309457 · 研究领域：Superconducting Materials and Applications、Particle Accelerators and Free-Electron Lasers、Particle accelerators and beam dynamics

The quench voltage, especially the turn-to-turn voltage, and the maximal temperature rise due to the quench in 50-mm-aperture Superconducting Super Collider collider correctors are calculated for various currents. The calculation shows a lower copper-to-superconductor ratio gives a lower quench voltage and a lower temperature rise as the result of much higher heat capacity of the superconducting material and lower copper resistivity at lower temperature. It also shows that when the copper to superconductor ratio is 2.2 to 1, each individually powered magnet is self-protected, and for the series of 24 correctors that are powered together in the collider, a parallel 2/spl Omega/ resistor on each magnet will provide needed protection. The energy loss on these resistors during powering up is less than 5% of the energy stored in the magnet at the operating current.>